Please note we will be working in a limited capacity from the 21st of December until the 5th of January. During this time we will still be shipping orders however if you have any inquiries email us at sales@nzperformance.co.nz
Cometic HONDA H22A1/H22A2 HEAD GASKET 1mm Thick (87mm) - C4255-040
HONDA H22A1/H22A2 HEAD GASKET 1mm Thick (87mm)
Cometic Multi Layer Steel (MLS) Head Gaskets
- Provide maximum sealing performance for today`s high output engines and require no sealants
- Ideal for aluminum heads to aluminum blocks and aluminum heads to cast iron blocks withstanding the shearing force created by the two materials.
- No need to re-torque, the embossing design of the MLS gasket promotes an even clamp load across the sealing surface allowing for measurable reduced bore distortion
Cometic MLS Gaskets are comprized of multiple layers of stainless steel due to it`s increased strength, ability to rebound and resistance to corrosion.
The outer layers of the gaskets are embossed and coated on both sides with Viton - a flouroelastomer rubber based material that is heat resistant to 250°C /482ºF. Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes.
The center or shim layer is uncoated stainless steel.
Pairs well with
Cometic HONDA H22A1/H22A2 HEAD GASKET 1mm Thick (87mm) - C4255-040
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
