Radium Engineering Check Valve 6AN ORB to 10mm Barb - 20-1534
Radium Engineering Universal Check Valve 6AN ORB to 10mm Barb
As depicted below, the flow direction is laser etched on the side of the hex.
NOTE: For internal valve purposes, the length under the threads is extended. This area (shown above) adds an additional 3.4mm when compared to a standard 6AN ORB fitting.
SPECIFICATIONS
O-Ring Seals: FKM
Plunger Seal: FKM
Hardware: Stainless Steel
Spring Material: Stainless Steel
Plunger Material: Stainless Steel
Body Material: Anodized Aluminum
Check Valve Type: Spring-Loaded Piston
Port Threads: 6AN ORB (9/16"-18)
Compatible Hose ID: 9.5-10.5mm (3/8")
Hex Size: 19mm (3/4")
Total Length: 1.4" (46mm)
Cracking Pressure: 0.3 psi @ 70F
Max Operating Pressure: 1000+psi @ 70F
Backflow Holding Pressure: 1000+psi @ 70F
Pairs well with
Radium Engineering Check Valve 6AN ORB to 10mm Barb - 20-1534
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
