Radium Engineering Fuel Filter Mount 10-15 Camaro - 20-1328
COMPATIBILITY
- 10-15 Chevrolet Camaro
OVERVIEW
Hardware for installing a Radium Engineering fuel filter in a 5th gen Camaro. Stainless steel M10 bolts secure a thick aluminum bracket to 3 threaded bosses on the chassis. The "FRONT" and engraved arrow are incorporated to prevent the user from installing it upside down and/or backwards. The billet aluminum 60mm clamp secures to this bracket using stainless steel screws.
The mounting location is next to the rear of the transmission (RH side). The picture above shows the Fuel Filter and 10AN ORB Fittings (both sold separately).
SPECS & FEATURES
- Away from exhaust with just enough ground clearance
- No permanent modifications required
- Billet anodized aluminum clamps
- Anodized aluminum bracket
- Clamp diameter: 60mm (2.36")
- Stainless Steel screws
INCLUDED
- Anodized aluminum mounting bracket
- Anodized aluminum filter clamp
- Stainless steel mounting hardare
NOTES
- Fuel filter not included
- Aftermarket fuel lines and fittings will need to be configured separately
- This clamp will also work with an external Bosch 0 580 254 044 fuel pump
Pairs well with
Radium Engineering Fuel Filter Mount 10-15 Camaro - 20-1328
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
