Radium Engineering Fuel Rails, Toyota 1GR-FE, Single VVTi - 20-0897
COMPATIBILITY
- 04-15 Toyota Tacoma
- 02-09 Toyota 4Runner
- 05-09 Toyota Tundra
- 06-09 Toyota FJ Cruiser
- 02-09 Toyota Hilux Surf
- 05-15 Toyota Fortuner
- 2005-up Toyota Hilux
- 2002-up Toyota Land Cruiser
Not compatible with newer 1GR-FE engines with dual VVT-i.
FUEL INJECTORS
There are two type of fuel rails made by Radium: upgrade rails and top feed conversion rails. Upgrade rails only upgrade the rail and the OEM fuel injectors can be reused. If an upgrade to the injectors is desired, they must be equivalent to the OEM injector, meaning they must be the same height and the upper & lower O-rings must match the OEM diameters and styles. Top feed conversion rails are used to convert a vehicle that has side feed (or sometimes air-assist) injectors over to a top feed injector.
This fuel rail is an upgrade rail. OEM or OEM equivalent injectors must be used.
Radium does not make fuel injector recommendations.
- Consult your tuner for injector brand or flow rate recommendations.
- Consult the injector manufacturer for a part number that has the correct dimensions.
OVERVIEW
Manufactured with 0.69" large internal bores, the Radium Engineering fuel rails can support all necessary engine power requirements. CNC machined aluminum mounting tabs are included for a factory fit and to maintain the original fuel rail height so both OEM or aftermarket equivalent injectors can work.
Each fuel rail features two 8AN ORB threaded end ports (4 total). The two fuel rails and all necessary mounting hardware are provided. Fittings and hose will need to be individually purchased.
The fuel rail ports are tapped for 8AN ORB. Appropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.
SPECS & FEATURES
- Anodized surface finish for wear and corrosion resistance
- Lightweight aluminum construction
- Inner bore diameter: 0.7 inch
- Compatible with OEM and aftermarket equivalent fuel injectors
- No special tools required for installation
- Fits under the factory intake manifold and engine cover
- Compatible with naturally aspirated and OEM supercharged vehicles
Pairs well with
Radium Engineering Fuel Rails, Toyota 1GR-FE, Single VVTi - 20-0897
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
