Radium Engineering Fuel Hanger Honda Del Sol Walbro GSS342 Or AEM 50-1200 - 20-3790

• Honda Del Sol (All models/trims/RHD/LHD)

OVERVIEW

This Radium Engineering fuel hanger replaces the stock fuel pump assembly. No cutting or modifying of the vehicle's sheet metal or fuel tank is required for installation. All fittings are machined low enough to clear the fuel pump access cover. The fuel pump is positioned in the factory collector bowl for fuel starvation protection.

Optional dual pump add-on kits can be purchased along with the fuel pump hanger to allow two pumps to be installed into the tank.

20-3790 Fuel Hanger Fits Walbro GSS342 or AEM 50-1200

PUMP COMPATIBILITY

• AEM 50-1000⁽²⁾
• AEM 50-1200⁽²⁾
• AEM 50-1220⁽²⁾
• AEM 50-1230⁽²⁾⁽³⁾
• AEM 50-1235⁽²⁾⁽³⁾
• Walbro GSS342⁽¹⁾

⁽¹⁾Sock filters are included in this kit for these pumps.
⁽²⁾Sock filters are included by the fuel pump manufacture.
⁽³⁾These pumps do NOT feature a check valve.

PORTS AND FITTINGS

The fuel pump outlet is tapped for 8AN ORB (3/4"-16) female threads on the top plate. The preinstalled 6AN male fitting permits an aftermarket feed line and/or connects to the plumbing kit listed below.

The return inlet is tapped for 6AN ORB (9/16"-18) female threads on the top plate. The provided 6AN male fitting permits an aftermarket return line and/or connects to the plumbing kit listed below.

NOTES

• If 2 aftermarket pumps are required, you must also purchase the corresponding dual pump add-on for the hanger and pump style being installed.
• If installing a brushless pump, the dual pump add-on can NOT be used due to the extra brushless controller wires.
• Choosing the best fuel pump(s) is based on the expected engine power output, fuel type (gasoline, E85, etc.), and fuel pressure.
• Single Walbro GSS342 (255LPH) fuel pump installations can re-use the OEM fuel pump wiring.
• It is recommended to upgrade OEM wiring to ensure the pumps are receiving full power and operating at their full potential.

ELECTRICAL

The custom designed anti-rotation stainless steel electrical studs easily handle the high current demand that compact multi-pin bulkhead connectors lack. These serviceable connections are hermetically sealed and impervious to all standard and exotic fuels. Non-conductive anodized aluminum acorn nuts are provided to prevent any accidental short circuiting. Furthermore, the in-tank wiring is insulated with high quality chemically resistant ETFE.

FEATURES

• Drop-In Installation
• Anodized Aluminum Construction
• Merged 8AN ORB Female Pump-Out Port
• Fittings for Aftermarket Fuel Lines
• Capable of 2 Pumps with Add-On
• Compatible with Various Pumps
• Included Fuel Pump Filter Sock
• High Current Electrical Hardware
• Stainless Steel Hardware and Clamps
• Gasoline, Methanol, and E85 Compliant
• Anti-rotation Electrical Terminals