Please note we will be working in a limited capacity from the 21st of December until the 5th of January. During this time we will still be shipping orders however if you have any inquiries email us at sales@nzperformance.co.nz
BorgWarner EFR8474 1.05 A/R T4Turbo
The EFR8474 represents the state-of-the-art from BorgWarner Turbo Systems. The winner of Pike's Peak Unlimited class for the last 2 years, 8474 is intended for applications that require an unmatched response and a broad powerband in the 500-800+hp range.
Designed specifically to win races, BorgWarner engineering designed the 84mm compressor wheel with lower inertia than the 83mm it supersedes. The combination of a high flowing 68mm compressor inducer with a low inertia and quick spooling 84mm exducer allows the same footprint to breathe a LOT better up top without compromising low-end response and midrange torque.
Efficiency plateaus are widened as a result and higher pressure ratios can be better utilized. Using Borg Warner’s large inducer “black series” 84mm billet compressor (68mm inducer) the 8474 houses the EFR extended-tip compressor wheel design capable of 95 lb/min airflow rate. Using the same 74mm Gamma-Ti turbine wheel from the EFR8374, this turbo flows an impressive 95lbs/min of air at the same 127k RPM maximum shaft speed. That’s a 22% improvement in flow on the same turbo size! We strongly recommend using an EFR Speed Sensor if you plan to run this turbo to the limit (125krpm+).
COMPRESSOR SPECIFICATIONS
- Compressor Type: Forged-Milled Wheel (FMW) Extended Tip
- Compressor Wheel OD (exducer): 84mm
- Compressor Wheel Inducer: 68mm
- Max Flow Rate: 95 lb/min
- Built-in BOV: All EFR compressor housings incorporate an integrated compressor recirculation valve
- Compressor Inlet: 4″ Ported Shroud Hose Coupler
- Compressor Outlet: 2.5″ Hose Coupler w/ integrated Vband option
TURBINE SPECIFICATIONS
- Turbine Type: Low Inertia Gamma-Ti Turbine Wheel
- Turbine Wheel OD: 74mm
- Stainless Steel Turbine Housing
- Turbine outlet: GT V-Band (aka 3″ V-Band) ~92mm OD for all EFR turbos
FEATURES
- Dual Row Ceramic Ball Bearings—lowest friction and fastest spool/response, most extreme durability, built-in 2mm oil restrictor
- Watercooled Center Section—watercooling is recommended, 14mm banjo bolts
- Double seals on both turbine and compressor end for extreme durability and resistance to any oil seepage
- Boost Control Solenoid Valve Integrated to Compressor Housing
- Integrated Speed Sensor mounting provisions
- Optional Turbo Speed Sensor Kit
- Optional Turbo Speed Gauge
Pairs well with
BorgWarner EFR8474 1.05 A/R T4Turbo
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
