{"product_id":"radium-engineering-fuel-vent-charcoal-canister-for-34in-hose-20-1828-12","title":"Radium Engineering Fuel Vent Charcoal Canister, for 3\/4in Hose - 20-1828-12","description":"\u003cdiv class=\"about__accordion-toggle active\"\u003e\n\u003ch3 class=\"about__accordion-h3\"\u003eOVERVIEW\u003c\/h3\u003e\n\u003cdiv class=\"about__accordion-toggle-icon\"\u003e\u003csvg class=\"icon icon-minus\" width=\"14\" height=\"3\" viewbox=\"0 0 14 3\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M6 0.5H8H14V2.5H8H6H0V0.5H6Z\" fill=\"currentColor\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"about__accordion-description\"\u003e\n\u003cp\u003eThe Radium Engineering fuel vent charcoal canister purifies odors that emit from the fuel tank vent system. It is designed for both EFI and carbureted fuel systems. \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eTESTING\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTo test for a restrictive pressure drop through the charcoal canister, a quick flow Radium Engineering dry break dump can was used. Results showed a negligible difference between a charcoal canister installed or not installed on the fuel vent.\u003c\/li\u003e\n\u003cli\u003eFuel vapor measurements were taken with a combustible gas detector which detects 50 ppm to 10,000 ppm.\u003c\/li\u003e\n\u003cli\u003eAll probe testing was measured inside the atmospheric exit of the fuel tank vent\u003c\/li\u003e\n\u003cli\u003eWithout the charcoal canister installed, the gas detector maxed out over 10,000 ppm of fuel vapor.\u003c\/li\u003e\n\u003cli\u003eWith the charcoal canister installed, the gas detector did not measure any fuel vapor (\u0026lt;50 ppm).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003ch4\u003e20-1828-12 FUEL VENT CHARCOAL CANISTER, FOR 3\/4IN HOSE\u003c\/h4\u003e\n\u003cp\u003eThis high flow kit is designed to use 3\/4\" fuel vent hose. When used in combination with this vent kit (20-0484-12). it can be integrated seamlessly with a Radium Engineering fuel cell surge tank. For a 3\/4\" air filter that will attach directly to one of the barbs.\u003c\/p\u003e\n\u003cdiv class=\"about__accordion-toggle active\"\u003e\n\u003ch3 class=\"about__accordion-h3\"\u003eSPECS \u0026amp; FEATURES\u003c\/h3\u003e\n\u003cdiv class=\"about__accordion-toggle-icon\"\u003e\u003csvg class=\"icon icon-minus\" width=\"14\" height=\"3\" viewbox=\"0 0 14 3\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M6 0.5H8H14V2.5H8H6H0V0.5H6Z\" fill=\"currentColor\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"about__accordion-description\"\u003e\n\u003cp\u003eThe fuel vent charcoal canisters are CNC machined from 6061 aluminum. They are type-II anodized for corrosion resistance.\u003c\/p\u003e\n\u003cp\u003eThe preassembled vibratory-packed activated carbon resides inside a 150 micron strainer and an anodized aluminum baffle. This prevents any loose carbon media debris from escaping the canister.\u003c\/p\u003e\n\u003cp\u003eFor high flow fuel venting, 16AN ORB (1-5\/16\"-12) female ports are featured on all fuel vent charcoal canister kits. These ports can be used interchangeably as the inlet or outlet.\u003c\/p\u003e\n\u003cp\u003eTo drain any unwanted fuel from the canister, two 4AN ORB (7\/16\"-20) female ports are machined at the bottom with preinstalled plugs. Depending on mounting orientation, one of these ports can be used if a\u003cspan\u003e \u003c\/span\u003ePetcock Drain Kit\u003cspan\u003e \u003c\/span\u003eis installed. \u003c\/p\u003e\n\u003ch3\u003eDIMENSIONS\u003c\/h3\u003e\n\u003cp\u003eThe dimensions shown below are the same for all fuel vent charcoal canisters.\u003c\/p\u003e\n\u003cp\u003e\u003cimg id=\"myImg\" class=\"myImages\" src=\"https:\/\/www.radiumauto.com\/cdn\/shop\/files\/20-1828_DIMENSIONS.png\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cdiv class=\"about__accordion-toggle active\"\u003e\n\u003ch3 class=\"about__accordion-h3\"\u003eINSTALLATION NOTES\u003c\/h3\u003e\n\u003cdiv class=\"about__accordion-toggle-icon\"\u003e\u003csvg class=\"icon icon-minus\" width=\"14\" height=\"3\" viewbox=\"0 0 14 3\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath d=\"M6 0.5H8H14V2.5H8H6H0V0.5H6Z\" fill=\"currentColor\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"about__accordion-description\"\u003e\n\u003cp\u003eDesigned to be used in conjunction with\u003cspan\u003e \u003c\/span\u003eRadium Engineering Fuel Cell Vent Kits.\u003c\/p\u003e\n\u003cp\u003eNOTES:\u003cbr\u003e1. A section of vent hose, upstream of the air filter, must be positioned higher than the fuel filler.\u003cbr\u003e2. It is recommended to mount the air filter at the rear of the vehicle, away from the exhaust system.\u003cbr\u003e3. With the 3\/4\" barb fitting in the 20-1828-12 kit, the air filter can be installed directly to the fuel vent charcoal canister. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLooking for more Radium? Check out the complete range\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/nzperformance.co.nz\/collections\/radium\" target=\"_blank\" rel=\"noopener noreferrer\" aco-visited=\"true\"\u003eHERE\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLooking for Radium Instructions? Find the complete list of instructions\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.radiumauto.com\/pages\/instructions\" target=\"_blank\" rel=\"noopener noreferrer\" aco-visited=\"true\"\u003eHERE\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Radium","offers":[{"title":"Default Title","offer_id":53233398579507,"sku":"20-1828-12","price":567.26,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/9576\/0691\/files\/20-1828-12_1200px_wide.jpg?v=1776050850","url":"https:\/\/nzperformance.co.nz\/products\/radium-engineering-fuel-vent-charcoal-canister-for-34in-hose-20-1828-12","provider":"NZ Performance Wholesale Ltd","version":"1.0","type":"link"}